Home » Precise Reliability Shop » SDT LUBExpert Ultrasound tool
LUBExpert field
LUBExpert system
LUBExpert ultrasonic lubrication

SDT LUBExpert Ultrasound tool

Call for price

The SDT LubExpert Ultrasound tool is an affordable tool to help you grease bearings right by monitoring ultrasound as lubrication is added. FREE SHIPPING*

Category: Tags: , , , , , , , , , ,

The SDT LUBExpert Ultrasound tool is an affordable tool to help you grease bearings right. The Lube expert allows you to monitor bearings as lubrication is being added. A bearing with not enough grease is “loud” as is a bearing with too much grease.

The SDT LUBExpert allows you to “listen” to the bearings while the grease is being added (acoustic lubrication). In addition you are monitoring the Ultrasound levels on the display and the Lube expert will guide you through the process. Using Ultranalysis Suite 3 software you can create databases and routes, add alarms, trend measurements, monitor grease quantities and more.

Bearing Database

LUBExpert maintains a database of all your assets including bearing type and dimensions.

Automation

LUBExpert removes the guesswork by automatically calculating the stabilization time between grease pumps.

Guided & Free Modes

LUBExpert offers two modes to grease bearings right; “free” and “guided”. Whether your program is mature, or just getting started LUBExpert helps you grease bearings right.

Shopping List

LUBExpert ultrasound tool reminds you to bring the right grease type and the right quantity for the days lube tasks.

Work Orders

LUBE expert reminds you which bearings need grease today. Restore order and discipline to your lubrication program.

 

System Messaging

LUBExpert uses messaging to document and advise your team why an asset was skipped.

LUBExpert Dynamic Option

Collect valuable, dynamic condition monitoring data with LUBExpert Dynamic and analyze it in UAS3. While in the ultrasonic lubrication process, the lubrication team can collect and view data in the Time and Frequency domain. They can remove silos between them and the condition monitoring team.

 

Contact us for a demonstration or more information.

 

 

*FREE ground shipping in the continental US.

SDT270 Ultrasound tool(Opens in a new browser tab)

Additional information

Brand

SDT

Tech Specs

General
External Sensor(s) SDT LUBEsense1 only
Internal Sensor(s) Infrared Temperature
Software Compatibility Ultranalysis Suite 2 Ultranalysis Suite 3
System
Operating System Linux
CPU ARM9
Data memory 256 Mb
Signal Processing
Dynamic range 109 dB
Resolution 16 bits
Sampling rate 256 kHz
Response time <10 ms
Ultrasound Measurement
Measuring Range -15 to 120 dBμV
Resolution 0.1 dBμV
Signal to Noise Ratio -6 dB
Bandwidth 36,1 to 40,4 kHz
Condition Indicators RMS, maxRMS, Peak, Crest Factor
Heterodyne Sampling Rate 8000 Samples/s (dynamic version)
Temperature Measurement
Measuring Range -70 to +380 °C/94 to +716 °F
Accuracy (0 to 50°C / 32 to 122°F) ± 0.5 °C/± 32.9 °F
Field of View (attenuation of 50%) 10°
Data Collector
Memory Capacity More than 10,000 data distributed over more than 10,000 measurement locations
Mechanical Characteristics
Display Graphic Backlit LCD (128 x 64)
Housing Extruded Aluminum, Shockproof Rubber Protection
Dimensions 226 x 90 x 40 mm / 8.90 x 3.54 x 1.57 in (L x W x H)
Weight 830 g/29,3 oz
Operating and Storage Temperature -15 °C to +60 °C / 14 °F to 140 °F
IP rating IP 40
Power
Battery Rechargeable NiMH battery.
Nominal Capacity 4.4 mAH
Autonomy +8 Hours
Recharge Time 6 Hours
Battery Charger 110-230 VAC, 50/60 Hz
Headphone
Noise Reduction Rating 25 dB
Other
Warranty Lifetime

Brochure

LUBExpert Brochure

You may also like…