SDT LUBEChecker

$1,995.00

The SDT LUBEchecker is an ultrasound solution designed to optimize bearing lubrication. FREE SHIPPING*

SKU: FS.LBC.001-02 Category: Tags: , , , , , ,

Grease Bearings Right

SDT LUBEChecker is an ultrasound solution designed to optimize bearing lubrication.

 

 

  • Focused

    Poor lubrication practices are a leading cause of bearing failure. LUBEChecker is an ultrasound solution focused on optimizing grease replenishment. It is the perfect companion for performing lubrication on condition based intervals.

  • Simple

    LUBEChecker is so easy to use. Simply open the box, connect it to your grease gun, and hear the difference. Its vibrant color display offers repeatable, accurate, digital measurements that guide you to a precision result every time.

  • Affordable

    Failed bearings and excessive grease consumption gnaw away at your bottom line. LUBEChecker is the affordable solution. Built with SDT quality, it’s offered at a price that makes you want to Hear More.

This intuitive device ensures bearings receive the right amount of grease at intervals dictated by condition, not run time. LUBEChecker uses the LUBESense1, a robust, repeatable sensor built to withstand harsh conditions.

Contact us for more information.

*FREE ground shipping in the continental US.

SDT LubExpert Ultrasound tool(Opens in a new browser tab)

Tech Specs

General
Function Ultrasound measurement device
Display 160×128 pixel Color OLED
Keyboard 5 function keys
Typical measurement range -6 to 99.9 dBμV (reference 0 dB = 1 μV)
Resolution 0.1 digits
Measurement bandwidth 35 to 42 kHz
Signal amplification +30 (built-in sensor gain) dB to +102 dB by step of 6 dB
RMS period time 250 milliseconds (main screen) / 3 sec (bar graph)
Sampling frequency 64 kHz
ADC Resolution 12 bit
Minimum sensitivity -31dB (@40 kHz, 0 dB-1 V/µbar)
Environmental
Operating temperature range -10 to +50 °C |14 to 122°F
IP rating IP42
Standards EN 61326-1:2013, EN 55011:2016 + A1:2017, EN 61000-4-2:2009, EN 61000-4-3:2006 + A1:2008 + IS1:2009 +A2:2010
Mechanical
Housing material ABS
Dimensions housing 158 x 59 x 38,5 mm |6.22” x 2.32” x 1.51”
Flexible rod length (Removable sensor) 445 mm |17.51”
Weight 350g | 12.35 oz
Battery/Utility connector USB Mini-B 5-pin
Power
Battery 2 AA batteries
Autonomy 7 hours
Audio
Operable with SDT provided head set only
Maximum audio output (protection) +83dB SPL with SDT headset
Headset 25dB NRR Peltor HQ headset
Other
Warranty Lifetime

Brochure

LUBEChecker_Brochure_EN

You may also like…